杭州奥弦科技有限公司

摄像机测量一站式平台 专业的品质和优秀的技术团队 专业的标准化测试光源 工匠精神,精益求精!
产品搜索
在线客服
 工作时间
周一至周五 :9:00-17:00
 联系方式
韩先生:13395817847
联系方式

联系人:韩先生

电 话:13395817847

邮箱:sales@aoxiankj.com

     1768482490@qq.com

地 址:杭州市临丁路699号创业园1401-1403


产品详情
德国爱莎测试卡TE117
分享到:
德国爱莎测试卡TE117
编号: ESSER-TE-117
市场价: 0.0
产品详情

德国爱莎测试卡,综合性测试卡TE-117 ,图像比例16:9


The TE117 is designed for quick (mainly visual) appraisal of transmission characteristics of HDTV cameras.


In the center of the test chart on a gray background (D=0.75; reflectance = 18%) a white circle with gray

scales and resolution wedges is located. On both sides of this central circle four circles with resolution

wedges are arranged.


The 16:9 format is marked by four arrows located on the horizontal and vertical central lines. In addition, four

arrows located close to the circles on the upper and the bottom edge of the picture mark the 4:3 format. Thus

the test chart can also be used for testing 4:3 cameras.


The white central circles shows four gray scales each of 11 steps. They increase in equal linear steps from

D=0.15 to D=1.65 and are used for checking halftone rendition of HDTV cameras. Due to the whitesurrounding

area the results may, however, be qualified.


All frequency values in the test chart are indicated in cph (cycles per height). In the central circle three

resolution wedges with different frequencies are arranged vertically and horizontally. They reach from 100 to

250, from 200 to 500 and from 400 to 1000 cph. In addition, two resolution wedges angled in 45° generate

frequencies of 200 to 500 cph.


In the middle of the test chart and on the left and right sides there are four squares with line rasters that are

inclined at angles of 0, 45, 90 and 135°. They generate a frequency of 200 cph. Those line rasters which are

inclined at angles of 45° and 135° generate a different frequency (141.4 cph) in horizontal and vertical

direction (due to their inclination). The eight outer circles are arranged in such a way that they can be used

both for 16:9 and 4:3 format. The larger ones show cross-shaped resolution wedges. The circular rings,

which can also be used for checking geometry, are designed for marking the resolution in vertical and

horizontal direction. Resolution is shown at 200, 500, 660, 725 and 800 cph.


The outer circles in the four corners have longer resolution wedges. They cross at 500 cph and have

markings from 200 to 800 cph.


In the center of the test chart both in the gray and white area bar elements are arranged with a length of 1

(=half the picture-height), 2, 4, 8, 16, 32 and 64 cph. Left to right vertical gray scale there are five additional

short bars with 100, 300, 500, 700 and 900 cph.